Clas Ohlson EN1104 - Alarm Clock Setup and Operation Guide; Key Product Functions; AC;DC Adaptor Connection; Time and Alarm Setting

4
E N G L I S H
1. Functions
• 12 and 24 hour display.
• Calendar (Year, Month, Date)
• Alarm with SNOOZE-function
2. Connecting the AC/DC adaptor
First plug in the included adaptor (5 V, 300 mA + in the centre) to a power point
and the contact to the clock’s DC outlet (5). The clock will then begin a test cycle.
The display’s various symbols will begin to blink in order and the alarm will sound.
When the test is nished 12:00 will be displayed.
3. Set the year, month, date, time and alarm time
1. Press and hold SET (1), 20_ _ (year) will begin to ash.
2. Use the
UP (2) and DOWN (3) buttons to set the year. Conrm by pressing
the SET (1) button once. The month display will now begin ashing.
3. Use the
UP (2) and DOWN (3) buttons to set the month. Conrm by pressing
the SET (1) button once. Set the date in the same way.
4. Use the
UP (2) and DOWN (3) buttons to set the time. Conrm by pressing
the SET (1) button once. Set the minutes in the same way.
5. AL will now show on the display. Set the desired alarm time beginning with
the hours using the UP (2) and DOWN (3) buttons, press SET(1) to conrm.
Set the minutes in the same way using the UP (2) and DOWN (3) buttons and
pressing SET (1) to conrm.
4. Select a 12 or 24 hour display
Press the UP (2) button (in normal display mode) to switch between a 12 hour
(12H) or 24 hour (24H) display.