Clas Ohlson EN1104 User Manual

5
E N G L I S H
5. Alarm
Activating the alarm:
• Press and hold the DOWN (3) button to activate the alarm. AL:on displays
when the alarm is activated. Whenthealarmisactivatedanindicatorlight
willilluminatebehindtheminutedisplay. The alarm will sound for one
minute at the set time.
Deactivating the alarm:
• Press and hold the DOWN (3) button to turn off the alarm, AL:shows
when the alarm is deactivated.
Shutting off the alarm:
• Activate theSNOOZE function by pressing the DOWN button. WhenSNOOZE
is activated an indicator light will begin blinking behind the minute display.
• Turn off the buzzer by pressing the SET button.
6. Displaying the date
Press in and release the SET button to display the date (month/date).
7. Battery backup
The alarm clock has a backup battery (CR2032) in case of a power cut.
The battery is normally good for 5-6 years (depending on power cuts etc.).
8. Cleaning
Wipe the clock with a lightly moistened cloth when required; never use solvents
or strong detergents.
9. Protecting the Environment
Sort and recycle products instead of disposing of them. All electronic products
and all packaging material should be sorted and processed according to local
environmental regulations.
Specications
Size 81 x 81 x 221 mm
PowerSupply Primary: 230 V~50 Hz
Secondary: 5 V, 300 mA + in the centre

Clas Ohlson EN1104 Specifications

General

Brand	Clas Ohlson
Model	EN1104
Category	Alarm Clock
Language	English