5
English
1
2
3
4
5
6
7
Description
1. Front safety grille
2. Fan
3. Stand
4. Rubber foot
5. Handle
6. Power switch (I-0-II)
7. Rear safety grille
Operating instructions
Unpack thefan and place it on afirm,
flat surface.
1. Plug themains lead into awall socket.
2. Switch thefan on and select aspeed
by setting thepower switch to position I
(low speed) or II (high speed).
3. Set thefan to thedesired tilt angle.
4. Switch thefan off by setting thepower
switch to the0 position.