Clas Ohlson MC-STW2018 - Warning Symbols

5
English
• Place theinduction hob on ahorizontal surface and allow
at least 10cm of free space between thesides and back
of theproduct and any wall. Make sure that theventilation
openings are not covered.
• Do not use sharp metal implements on thesurface of
theinduction hob; doing so could result in scratches
and damage. If theinduction hob is cracked, switch it off
immediately to avoid electric shock.
• Theinduction hob must not be overloaded with heavy items;
doing so may damage theplastic cover and hotplate.
• Do not use theinduction hob near agas stove, kerosene
stove, fireplace or in anenvironment with high temperature.
• Theinduction hob must not be used with atimer or other
equipment which turns it on automatically.
• Theinduction hob should be switched off using [ ] (1), do not rely
solely on thethetimer function to switch thehob off automatically.
Warning symbols
Thehotplate will be hot during use and even immediately
after apan has been removed. To avoid burns, do not
touch thehotplate.
Warning: Read all thesafety warnings in theinstruction
manual prior to using theappliance.
Avoid burns; never place you hand on thehotplate.