Clas Ohlson MC-STW2018 - Timer Function; Keep-warm Function; Button Lock

8
English
1. Press [ ] (1) to switch theinduction hob on.
2. Press themode button [ Temp./Level ] (5) within 10 seconds to select displaying
thetemperature (Temp) or power level (Level). Note: This must be done in order for
theinduction hob to switch on.
3. Thered indicator light in theon/off button [ ] (1) will light up in heating mode, i.e.,
when theinduction hob is switched on. Thedefault preset temperature is 140°C,
thedefault power level is 1600W.
4. Thetemperature or power level setting can be changed by pressing [ + ] or [ – ] (3).
5. If thecooking vessel is removed from thehotplate, theheat is switched off straight
away and thealarm will beep for 60 seconds. Theinduction hob will then enter
standby mode and “L” will flash on thedisplay.
6. Press [ ] (1) to switch theinduction hob off. “H” flashes on thedisplay until
thehotplate has cooled down.
7. Unplug theproduct after use.
Timer mode
1. Switch theinduction hob on as normal.
2. Press theTimer button [ ] (4) to activate thetimer function.
TheTimer indicator will light up and thetime digits (000) will flash on thedisplay.
Adjust thetime using [ + ] and [ – ]. TheTimer can be set from 1 minute to 3 hours.
3. When thetimer duration has been set it will stop flashing on thedisplay after afew
seconds. TheTimer then starts to countdown.
4. When theset time has elapsed theinduction hob will switch off automatically.
5. If thetimer function is not used, theinduction hob will automatically switch off after
2 hours.
Keep-warm mode
1. Switch theinduction hob on as normal.
2. Press theKeep-warm button [ ] (2) to activate thekeep-warm mode (60°C).
In this mode, food is kept warm on alow power level. Note: Thepower level of
theKeep-warm mode cannot be adjusted.
3. TheKeep-warm mode can be switched off by pressing [ ] (1) or by pressing
theMode button [ Temp./Level ].
Button lock
1. Switch theinduction hob on as normal.
2. Press [ + ] and [ – ] simultaneously to lock thecurrent settings. “Loc” and theTemp/
Level setting will flash alternatively on thedisplay when thebutton lock is activated.
When in this mode, theinduction hob can only be switched off using [ ] (1),
all other buttons and functions are disabled.
3. Thebutton lock can be deactivated by simultaneously pressing in both [ + ] and [ – ]
for about 3 seconds.