Benämning
Art.no: XX-XXXX Model: XXXXX
Please read the entire instruction manual before use and save for future reference.
We apologise for any text or photo errors and any changes of technical data. If you have any
questions concerning technical problems please contact our Customer Service Department.
GREAT BRITAIN: For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Internet: www.clasohlson.co.uk
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
20140307
Digital Watch
Art.no: 36-4047 Model: YP08407/01
Please read theentire instruction manual before using
theproduct and save it for future reference. We reserve theright
for any errors in text or images and any necessary changes
made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Description
Features
• Displays time, year, month, date and day
• Stopwatch with split-time function
• Timer function
• Alarm
• 12/24 hour display
• Backlight
• Water resistant to 10 ATM
Buttons
D. Alarm AL
• Alarm sounds daily at theset time
• 5 alarms
Setting the time
Analogue
1. Pull out theadjustment crown and turn it
to adjust theminute and hour hands.
2. Push theadjustment crown back in to
restart theanalogue watch.
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
A
B
C
Hours display
Minutes display
Seconds display
Hourly chime
activated
Digital seconds
display
Date display
Month display
Alarm
D
Display
Use
Press MODE (B) repeatedly to change functions. Thesequence is:
Time – stopwatch – countdown timer – alarm.
A. Time
• 12/24-hour display
• Hours, minutes, seconds, day and date display
• 100-year calendar (2000–2099)
B. Stopwatch SP
• Accuracy: 1/100 second
• Stopwatch range: 00:00:00–23:59:59
C. Countdown timer TR
Countdown range: 23:59:59–00:00:00
5. Repeat steps 3 and 4 for theremaining settings.
Thesettings sequence is as follows: Seconds – hours –
minutes – year – month – date.
6. Push RESET (A) when you have completed inputting all
your settings. Theday is automatically set when theyear,
month and date is set.
Switching between the12 and 24 hour display
When thewatch is in time display mode, press
start/stop (D) once to switch between 12 and
24 hour display. “PM” will be displayed when in
12 hour display mode.
Stopwatch
Without split-time
1. Press MODE (B) therequired number of
times to reach thestopwatch settings (SP).
2. Press start/stop (D) to start
thestopwatch.
4. Press RESET (A) to reset
thestopwatch back to zero.
3. Stop thestopwatch by
pressing start/stop (D) again.
Digital
1. When thewatch is in time display mode
press and hold RESET (A) until theseconds
display starts to flash.
2. Press start/stop (D) to reset theseconds display.
3. Press MODE (B) to switch to thenext setting.
4. Press start/stop (D) repeatedly to increase
thedigits incrementally. Hold thebutton in to
increase thedigits quickly.