Clas Ohlson V8205_2 - Responsible Disposal

6
English
Finger holes
3. Remove thewater separator (3) and filter (4) from thedust collector (2) and empty it.
4. Twist thefilter anticlockwise and remove it from thewater separator.
5. Brush dust and dirt from thefilter. Adamp cloth can be used to clean theinside of
thedust collector.
6. Rinse thefilter and water separator under arunning tap. Make sure that they are
completely dry before fitting them back into thedust collector.
7. Insert thefilter into thewater separator and twist it clockwise until it locks in place.
Fit thewater separator (with thefilter inside) into thedust collector. Make sure that
thefilter is fitted correctly before using thevacuum cleaner again.
8. Click thedust collector back onto themotor unit.
Thebest performance is achieved with aclean filter and anempty dust collector.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout theentire EU. In order
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible manner. When
recycling your product, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is disposed of in
anenvironmentally sound manner.