Need help?Do you have a question about the Clas Ohlson ws2370 and is the answer not in the manual?
General| Brand | Clas Ohlson |
|---|---|
| Model | ws2370 |
| Category | Weather Station |
| Language | English |
Instructions for setting up the remote transmitter, including house code and channel selection.
Instructions for inserting batteries and setting up the receiver unit.
Describes the automatic process for synchronizing outdoor temperature readings when batteries are first installed.
Details on how to manually initiate the synchronization process for outdoor temperature readings.
View indoor/outdoor temperatures, switch units (°C/°F), and check min/max values.
Understand temperature trend indicators and 'Hi'/'Lo' status for out-of-range readings.
How to set high or low temperature alarms for the indoor temperature.
Instructions for setting high or low temperature alarms for the outdoor sensor.
Interpreting storm and snow/freeze warning symbols for immediate weather events.
Understanding forecast limitations, altitude adjustments, and initial reading periods.
Visualizing past barometric pressure trends over 12 hours in 3-hour intervals.
Guidance on replacing batteries in the receiver and the impact on settings.
Instructions for replacing batteries in the remote transmitter unit.
Technical specifications for the WS2370 receiver, including battery type and operating environment.
Technical specifications for the WT450 transmitter, including battery type, frequency, and range.
To Next Page
