Need help?Do you have a question about the Classe Audio CA-2100 and is the answer not in the manual?
General| Power Output (8 Ohms) | 100 W |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 50k Ohms |
| Gain | 29 dB |
| Output Power (4 Ohms) | 200 W |
| Frequency Response Accuracy | +/- 0.1 dB |
| Signal-to-Noise Ratio | >100 dB |
Provides crucial warnings regarding fire and electric shock risks, emphasizing not to expose the appliance to rain or moisture.
Advises against using the apparatus near water, to clean with a dry cloth, and to ensure proper ventilation.
Covers plug safety, power cord protection, using specified accessories, and referring servicing to qualified personnel.
Amplifier is factory set for specific AC mains voltage; users or dealers cannot change it.
Details protection circuitry for startup, over-voltage, and under-voltage conditions, with LED indicators.
Circuits protect amplifier and speakers from fault conditions like overload, DC offset, voltage, and temperature.
Toggles amplifier between operate and standby modes; LED indicates status (standby, initialization, operate, out of range).
Recommended for preserving signal nuances and rejecting noise/interference (EMI/RFI) for superior audio performance.
Common analog connection; Classé ensures good performance, but lacks balanced input's interference immunity.
RJ-45 connectors reserved for future control and communication applications using Classé Audio's CAN-Bus.
Warns of dangerous voltages inside, prohibiting user access for safety; service must be referred to qualified personnel.
AC mains connection last; power up amplifier last, power down first to prevent transients to loudspeakers.
Use Select/Mode buttons to configure balanced or single-ended input operation for each channel.
Connect preamp using balanced or single-ended cables, ensuring snug connections for optimal signal integrity.
Connect amplifier output terminals to loudspeakers using high-quality speaker wires, observing correct polarity.
Enables interaction between Delta series components for system-wide status and shared features via touchscreen.
Control via touchscreen of any Delta series component; accessing CAN-Bus via menu, status, and more buttons.
Records events leading to protection mode activation (overload, temp, voltage, etc.) for diagnostics.
Never apply liquid cleaners directly to the amplifier to prevent internal damage to electronic components.
Checks for power, AC mains issues, fuse, or voltage range problems; suggests microprocessor reset.
Addresses protection circuitry activation; guides resetting and identifying upstream faults.
Checks ventilation, ambient temperature, and protection mode sequences for recurring shutdowns.
Detailed steps for identifying and replacing the AC mains fuse with correct type and rating.
Suggests resetting the unit by disconnecting/reconnecting AC power if both LEDs flash.
To Next Page