Classen PRO HSC18A5 - Page 25

25
ITEM PART NO. DESCRIPTION QTY
ITEM PART NO. DESCRIPTION QTY
PRO
SOD CUTTER
1 4175303 BLT-HEX 5/16-24X1 FL THD 6
2 C500001 GREASE FITTING, 1/4 x 28 6
3 64025-51 NUT, 5/16-24 6
4 C500115 WASHER, 5/16 LOCK 6
5 C100003 BEARING 4
6 C100001 WASHER, 3/4 NYLON 8
7 C100002 SEAL 8
8 C100007 GRIP, RUBBER 2
9 C100016.7 BLADE, 18" CUTTING 1
10 4172017 S-ARM, BLADE 2
(INCLUDES ITEM 31)
11 C500006 WASHER, 1/2 LOCK 4
12 C500007.7 NUT, 1/2 HANDLE 1
13 C500034 WASHER, 1/2 FLAT 8
14 C500088 WASHER, 1/4" FLAT 1
15 C500106 NUT, 1/2-13 5
16 C500131 NUT, 1/2-13 LOCK 2
17 C500241 BOLT, 1/2-13 x 1 2
18 C500249 BOLT, 1/2-20 x 1 2
19 C500152 BOTL, 1/2-13 X 2-3/4 2
20 C600001 STEEL SLEEVE 4
21 C400411.7 ARM, ECCENTRIC ENHANCED 2
22 4172692 KNOB-PLASTIC 1
23 C200004.7 BOLT ,PITCH ADJUSTMENT 1
24 C200005.7 BOLT, HEIGHT ADJUSTMENT 1
25 C300039.30 PLATE, DEPTH GAUGE 1
26 C400001.7 BAR, HIEGHT ADJUSTMENT 1
27 C400238.7 PITCH ADJUSTMENT BAR 1
28 C500137 WASHER, 1/4 LOCK 1
29 C500296 BOLT, 1/4 x 2-1/2 CARRIAGE 1
30 C500068 NUT, 1/4-20 NYLOC 1
31* 4164033 LABEL-CHF VERT 1
32 C500272 WSHR-1/2” EXT LOCK 2
33 C400412.7 WSHR-STEEL ENHANCED 2
34 C100626 WSHR-PLASTIC 4
35 C100625 BEARING ENHANCED 2
* NOT ILLUSTRATED
CUTTER ASSEMBLY
FIGURE 3