Classen SC-18HD - Troubleshooting Common Issues; Blade and Belt Related Problems

13
TROUBLESHOOTING CHART
NOTES: ______________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
PROBLEM CAUSE REMEDY
Blade will not stay in ground a. Bottom of blade is rounded off a. Blade should be sharpened or re-
placed
Belts jump off a. Wrong type of belt a. Use only the special factory belt
b. Pulley misalignment b. Realign pulley