Classen SC-18HD - SC-18 HD Specifications; Engine, Blade Pitch, and Dimensions; Weight, Gear Case, and Cutting Width

14
SPECIFICATIONS
SELF-PROPELLED WALK-BEHIND SOD CUTTER
SC-18HD
ENGINE
Model ................................................4 cycle 5.5 H. P. Honda
Model GX160 GX1600HV
9.9 cu. in. (163 cc)
Starter .......................................................................... Recoil
Governor.............................. 3600 RPM ± 100 RPM, no load
Clutch ................................. spring loaded belt tightener type
REDUCTION
Engine to blade......................................................... 3.03 to1
Engine to drive wheels ............................................ 57.2 to 1
WHEELS:
Drive ........................................... 8” (203 mm) Dia. w/knobby
tread vulcanized to hub
Rear ................ 8 x 1.75 (203 X 45mm) semi-pneumatic tires
CUTTING WIDTH:
SC-18 ............................................................................... 18”
”
GEAR CASE
Lubrication .................................................EP 140 Gear lube
Capacity.........................................................31/2Pints(1.7L)
Cutting depth .....................................................up to 2-1/2”
BLADE PITCH
Hand lever adjustment..................................variable 0° to 9°
Blade speed ...................... 1188 RPM @ 3600 engine RPM
DIMENSIONS
Width ...................................23” - For all, except SC-24 - 25”
Length............................................................................... 59”
Height ............................................................................... 35”
Wheel Base ...................................................................... 22”
WEIGHT
Dry Weights
SC-18/8 ................................................................... 352* Ibs.
* Add 12 Ibs. to each above weight for CE Guards