10
• NOTE - After carefully rinsing and drying the anti-
grease grill, put it back in place. Never put it back
in wet!
• Never attempt to use your Cooker hood without the
grease filter grill in place!
a) Changing the light bulb
9 Before changing the light bulb, ensure that the appliance is not
live (i.e., ensure that you have switched it off at the omni-polar switch on
the wall switch plate.).
9 Open the grease filter support grill (see previous page).
9 Find the bulb in its position.
9 Change the bulb
using only olive-shaped spares.
* PLEASE NOTE - Defective bulbs should be replaced
immediately.
9 Replace the grease filter support grill.
Maintenance – Changing the Light Bulb and Carbon Foam
To Next Page
Loading...