Classique CLH9GLSS - Specifications of your Cooker Hood

2
Congratulations on purchasing a Cooker Hood!
To fully enjoy using your appliance long into the future,
please firstly familiarise yourself with its specifications,
safety advice and operational instructions included in this
manual. You will also need this manual to ensure that your
Cooker Hood has been installed properly.
Your cooker hood can work either as an extraction fan or as
an air recirculator. Whichever mode you choose, you will
need to bear in mind that the extractor calls for ducting (not
included) to be worked from the exhaust of your fan, while
the recirculation function will require the replacement of
carbon filters.
Please see the installation section of this manual for details.
Specifications of your Cooker Hood:
Model Width
(CM)
control light Extraction
capacity
Carbon
filter
CLH60SLMSS 60 Slider
switch
1x
incandescence
250 SF11
CLH60SLMW 60 Slider
switch
1x
incandescence
250 SF11
CLRH60SS 60 Push
button
2x
incandescence
500 ST1
CLRH90SS 90 Push
button
2x
incandescence
500 ST1
CLH600BXSS 60 Push
button
2X halogen 750 S1
CLH900BXSS 90 Push
button
2X halogen 750 S1
CLH9GLSS 90 Electronic
button
2X halogen 750 S1
Specifications of your Cooker Hood