Clatronic BS 1313 - Emptying and Cleaning; Emptying the Container; Cleaning Instructions; Troubleshooting

BS1313_IM_new - SH separat 13.02.23
12
Emptying the Permanent Filter and Collection Container
1. Switch off the appliance with the on / off switch. Pull the
mains plug out of the socket.
2. Detach the motor housing from the collection container
by pressing the locks inwards. Remove the motor
housing.
3. If necessary, remove the permanent lter. Shake it out.
4. Remove the suction hose.
5. Empty the collection container.
6. If necessary, put the permanent lter back into the
collection container.
7. Reassemble the hose connection and the motor housing.
8. Resume operation.
End Operation
1. Switch off the appliance.
2. Unplug the mains plug from the socket.
Cleaning
WARNING:
• Pull the mains plug out of the socket before cleaning
or maintaining the appliance.
• Never immerse the motor housing in water for clean-
ing. It could cause an electric shock or re.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaners.
Collection Container
• Rinse the collection container with clean water after use.
• You can remove impurities in the container with a sponge
or a nylon brush.
Accessories
• You can clean all accessories in warm rinse water with
a little hand dishwashing liquid. If they are not very dirty,
you can just tap them out.
• Rinse with clean water and dry the parts. Do not put
the appliance back into operation until all lters are
completely dry.
Housing
The housing can be wiped clean with a slightly damp cloth.
Storage
• Clean the appliance as described and allow it to dry
completely.
• You can wrap the mains cable around the motor housing.
• The attachment device (6) is intended exclusively for the
oor nozzle without tube and hose.
• We recommend storing the appliance in its original
packaging if you do not intend to use it for a long period
of time.
• Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Troubleshooting
Problem Possible Cause Remedy
The appliance has no function. The appliance has no power supply. Check the socket with another appliance.
Insert the mains plug correctly.
Check the house fuse.
The appliance does not suck. The collection container is full. Empty the collection container.
There is a foreign object in the suction
hose or nozzle.
Check the accessories for foreign objects.
The appliance has tipped over. 1. Switch off the appliance.
2. Maintain the standstill of the motor.
3. Resume operation.
The sealing ring between the motor hous-
ing and the collection unit is missing.
Check the seal.