To Next PageTo Next Page
Need help?Do you have a question about the CLAUSING 5910 Series and is the answer not in the manual?
Provide part number, name, and machine model/serial number when ordering.
Detailed dimensions for the 5900 series Clausing lathes, including length and height.
Ensuring a solid and level foundation is crucial for machine stability and performance.
Remove protective coatings with solvent and clean bearing surfaces thoroughly.
Safe methods for moving the lathe, emphasizing avoiding sliding and using proper lifting points.
Connect power supply to the junction box, verifying voltage and current requirements.
Properly level the machine using leveling screws and secure it to the floor if necessary.
Schedule for applying lubricants based on frequency: daily, weekly, monthly, and semi-annually.
How to engage and use direct drive and back gear for different speed ranges.
Features of the headstock and adjustments for spindle speed via the control dial.
Operating the motor control, quick-change gear box, and clutch/brake for spindle control.
Using the carriage, threading dial, and engaging controls for threading and feeds.
Proper placement of the tool post slide for optimal tool support and preventing damage.
Step-by-step guide for securely mounting and safely removing chucks and face plates.
Recommendations for cleaning and lubricating chucks to ensure longevity and accuracy.
Essential practices for keeping the lathe clean, lubricated, and in good working order.
Adjusting the clutch, cross slide/compound slide gibs, and carriage bearing plates.
Procedure for properly tensioning the timing belt for optimal performance.
Replacing the shear pin and adjusting spindle bearings for smooth operation.
Procedures for replacing the variable speed belt and adjusting drive belt components.
Diagram detailing all parts and their arrangement within the lathe cabinet.
Exploded view illustrating the components that make up the lathe bed.
Diagram showing parts of the headstock casting, gear train guard, and related components.
Detailed illustration of the quick-change gear box assembly and its constituent parts.
Illustration of electrical components, wiring, and junction box layout.
Exploded view of the countershaft assembly excluding the clutch mechanism.
Diagram showing the countershaft assembly including clutch and brake components.
Illustration of the motor base assembly, including brackets and mounting hardware.
Diagram illustrating the components of the variable speed control system.
Exploded view of the variable speed motor pulley assembly and its parts.
Diagram showing the parts of the compound and cross slide assemblies.
Illustration detailing the components that make up the carriage saddle assembly.
Diagram showing the various parts that constitute the apron assembly.
Exploded view of the rack pinion gear assembly and its constituent parts.
Illustration detailing the parts of the tailstock assembly and its base.
General