Clay Paky SHARPY WASH 330

To Next Page

C61378

C61379

INSTRUCTION MANUAL

Congratulations on choosing a Clay Paky product!

We thank you for your custom.

Please note that this product, as all the others in the rich Clay

Paky range, has been designed and made with total quality to

ensure excellent performance and best meet your expectations

and requirements.

Carefully read this instruction manual in its entirety and keep it

safe for future reference. It is essential to know the information

and comply with the instructions given in this manual to ensure

the fitting is installed, used and serviced correctly and safely.

CLAY PAKY S.p.A. disclaims all liability for damage to the fitting

or to other property or persons deriving from installation, use and

maintenance that have not been carried out in conformity with this

instruction manual, which must always accompany the fitting.

CLAY PAKY S.p.A. reserves the right to modify the

characteristics stated in this instruction manual at any time and

without prior notice.

ENGLISH

INDEX

Page Contents

2 Safety information EN-IT-FR-DE-ES

12 Unpacking and preparation

13 Installation and start-up

14 Control panel

16 Menu setting

23 Maintenance

29 Technical information

29 Cause and solution of problems

30 Channel functions

SHARPY WASH 330

SHARPY WASH 330 PC

Need help?

Do you have a question about the Clay Paky SHARPY WASH 330 and is the answer not in the manual?

Summary

Safety Information

Installation and Safety Precautions

Proper installation, anchor stability, safety chain, and distance rules.

Environmental and Electrical Safety

Ambient temperature limits, IP rating, electrical connection standards, and surface temperature.

Lamp and Photobiological Safety

Safe handling of the lamp, maintenance delays, and eye protection from light radiation.

Battery and Disposal Compliance

Battery Handling and Environmental Disposal

Guidelines for battery disposal and product recycling per regulations.

European Directive Compliance

Confirmation of adherence to LVD, EMC, and RoHS directives.

Unpacking and Preparation

Package Contents and Mechanism Lock

Listing of included items and instructions for locking movement mechanisms.

Installation and Start-Up Procedures

Projector Mounting and Safety Cable Fitting

Guidance on projector placement and securing the safety cable.

Power Cable Connection and Disconnection

Steps for safely connecting and disconnecting the power cable.

Control Panel and Basic Operation

Mains Supply and DMX Signal Connections

Connecting the projector to power and the DMX control network.

Projector Startup and Display Information

Startup sequence, display messages, and status indicators.

Menu System Navigation

Setup, Option, and Information Menu Details

Configuration, operational settings, and system information access.

Manual Control, Test, and Advanced Menu Access

Direct control, effect testing, and advanced configuration options.

Maintenance and Component Replacement

Head Cover and Effect Module Procedures

Instructions for opening the head and removing/inserting effect modules.

Lamp Replacement Process

Detailed steps for safely replacing the projector lamp.

Periodic Cleaning and Servicing Recommendations

Guidelines for cleaning and recommended annual technician service.

Battery Removal Instructions

Steps for safely removing the internal battery.

Technical Specifications

Power, Lamp, Motor, and Cooling Specs

Technical details on power input, lamp type, motors, and cooling system.

Movement Range, Protection, and Body

Specifications for Pan/Tilt angles, IP rating, CE marking, and housing.

Troubleshooting Common Issues

No Power and Electronic Malfunctions

Solutions for projector startup failures and electronic problems.

Channel Functions and Timing Control

DMX Channel Functions Mapping

Table mapping DMX channels to Standard and Vector modes.

Colour, Beam, and Movement Channel Settings

Details on colour mixing, beam effects, Pan/Tilt, and Zoom channel control.

Function, Reset, Lamp, and Timing Channel Details

Control of specific functions, reset operations, lamp status, and timing parameters.