Claypaky Xtylos User Manual

Xtylos – User Menu
1
Default parameters highlighted in grey
Main Menu
Level 1
Level 2
Level 3
Choices / Values
SET UP
DMX Address


001-512
Work Mode


Standard
Smart
Service
Fixture ID


000-255
Ethernet Interface
Control Protocol

Disabled
Art-net IP 2.x.x.x.
Art-net IP 10.x.x.x.
Art-net Custom IP
Repeat on DMX

Disabled
Enabled on primary
Universe

000-255
Custom IP Address
IP address byte 1
000-255
IP address byte 2
000-255
IP address byte 3
000-255
IP address byte 4
000-255
Custom IP Mask
IP mask byte 1
000-255
IP mask byte 2
000-255
IP mask byte 3
000-255
IP mask byte 4
000-255
Xtylos
User Menu
04/2020

Claypaky Xtylos Specifications

General

Wattage	300 W
Pan	540°
Tilt	270°
Type	Moving Head
Gobo Wheels	2
Gobos	7 rotating
Prism	Yes
Effects	Animation Wheel
Control Protocols	DMX, RDM

Summary

SET UP Menu

DMX Address Configuration

Configure the DMX start address for the fixture, between 001 and 512.

Work Mode Selection

Select operational mode: Standard, Smart, or Service.

Control Protocol Setup

Set the network control protocol, e.g., Art-Net, for the fixture.

Ethernet Interface Configuration

Configure network settings like IP address and mask for Ethernet.

OPTION MENU

Pan and Tilt Movement Settings

Configure Pan and Tilt movement parameters like inversion and speed.

Dimmer Curve Selection

RGB Gamma Curve Selection

PWM Frequency Settings

Select one of the ten base PWM frequencies for operation.

User and Default Settings Management

Manage user presets and restore default settings.

MANUAL CONTROL MENU

Projector Reset

Reset the projector from the control panel to its default state.

DMX Channel Level Control

Set DMX channel levels via the control panel (0-255 or 0-100%).

ADVANCED MENU

Firmware Upload and Transfer

Transfer firmware from one projector to all connected projectors.

Projector Model Setup

Change the projector model, typically after CPU replacement.

Mechanical Calibration

User Menu Locking with Password