CleanForce CF1400 Operator's Manual

CleanForce CF1400

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

CF1400

IF YOU HAVE ANY QUESTIONS, CALL OUR TOLL FREE HOTLINE.

DO NOT RETURN PRODUCT TO PLACE OF PURCHASE.

English 1

Español 19

Before operating this unit, please read this manual thoroughly and retain it

for future reference.

Lea estas instrucciones de uso atentamente antes de la primera puesta en

marcha del aparato.

NO DEVOLVER EL PRODUCTO AL LUGAR DE COMPRA.

SI TIENE ALGUNA CONSULTA, LLAME A NUESTRA LÍNEA GRATUITA:

1-866-902-9690

ww

Rev: CF1400-v2

w.ForceToolsUSA.com

ELECTRIC HIGH PRESSURE WASHER - OPERATOR MANUAL

LAVADORA ELÉCTRICA DE PRESIÓN ALTA - MANUAL DE INSTRUCCIONES

Other manuals for CleanForce CF1400

Instruction Manual10 pages

Questions and Answers:

C
Christopher HeathJul 31, 2025
What to do if my CleanForce Pressure Washer motor will not start?
- A
  Autumn FowlerJul 31, 2025
  If the CleanForce Pressure Washer motor won't start, ensure the On/Off switch is in the “ON” ( | ) position. Check that the GFCI is properly plugged in. If using an extension cord, verify it's a 25’ (7.6 m) or 50’ (15 m) 14AWG cord without any damage. Try a different electrical outlet to rule out power supply issues. Finally, the pressure washer thermal protector might have tripped; allow the unit to cool before restarting.
J
Jamie DeleonAug 11, 2025
Why is my CleanForce CF1400 not reaching high pressure?
- J
  jacquelinedavidsonAug 11, 2025
  If your CleanForce Pressure Washer isn't reaching high pressure, first, replace the garden hose with a 1” (25 mm) or 5/8” (16 mm) hose. Then, check the garden hose for any kinks, leaks, or blockages that might be restricting the water supply. Ensure the water source is fully open to provide enough water. Clean the water inlet filter by removing it and rinsing it in warm water. Verify the power nozzle is set to the high-pressure position. Lastly, check that all hoses and fittings are airtight to prevent the pump from sucking air. If necessary, turn the machine off and purge the pump by squeezing the trigger until water flows through the nozzle.

CleanForce CF1400 Specifications

Power

power source requirement	120 V / 60 Hz
current drawn	13A

Operating Environment

rated pressure	1400 PSI
rated water flow rate	1.4 GPM
inlet water	Cold Tap Water

Weight and Dimensions

electrical cord length	35’
high-pressure hose length	19’

Related product manuals

Preview: CleanForce CF1800HD

CleanForce CF1800HD