EasyManua.ls Logo

CleanForce CF1800HD - Page 12

CleanForce CF1800HD
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
CaUTiOn
Make sure spray tip and wand is well locked. Do not move the spray tip while
trigger is depressed.
CaUTiOn
If painted surfaces are peeling or chipping, use extreme caution as pressure
washer may remove the loose paint from the surface.
For most cleaning applications, a twenty degree (20
o
) spray angle be
recommended to avoid damage to the surface being sprayed.
The pressure of spray on the surface will increase when you move the wand closer
to the surface.
Turn off the pressure washer by
pressing the switch button with mark
“ O ”, activate the safety latch for a
break. For storage, drain machine
after use by removing water con-
nection, turning ON the machine for
a few seconds and depressing gun
trigger to release remaining water in
the pump. Turn OFF immediately.
ASSEMBLY AND OPERATION INSTRUCTIONS
OFF

Other manuals for CleanForce CF1800HD

Related product manuals