19
TROUBLE SHOOTING
Symptom Cause Solution
Motor buzzes but fails
to run. (continued)
Pressure washer not used
for long periods.
Call the Toll-Free Hotline.
Residual friction among
components. Unit might
hum.
Disconnect water supply
and power ON for 2 to 3
seconds, repeat couple
times or until the motor
starts.
No water.
Water supply is OFF. Turn ON water supply.
Kink in the garden hose.
Remove kink in garden
hose.
If you have any questions, visit our website for key FAQ’s, downloadable
troubleshooting steps, instructional videos, and replacement parts
purchase at www.ForceToolsUSA.com, or call our toll free hotline: 1-866-
902-9690.
To Next Page
Loading...
