12
60" W RETURN
7 | SECURE MAIN SURFACE
Position the surface on the desk frame. Align the outer sides of the surface
flush and parallel with the outer sides of the end legs. Adjust beam
positions if sides are not flush. Fasten the surface to the desk frame with
wood screws through the leg brackets into the underside of the surface.
8 | SECURE RETURN SURFACE
Position the surface on the desk frame. Align the outer sides of the surface
flush and parallel with the outer sides of the end legs. Adjust beam
positions if sides are not flush. Fasten the surface to the desk frame with
wood screws through the leg brackets into the underside of the surface.
To Next Page
Loading...