Need help?Do you have a question about the CLEAR DESIGN BLADE BBC1 and is the answer not in the manual?
Provides a general overview of the 54" W return workstation setup.
Secures the beam to the leg using a lock plate, ensuring a tight fit.
Adjusts the beam width to match the work surface dimensions for proper alignment.
Attaches the main work surface to the desk frame using wood screws.
Attaches support hardware to the main surface, preparing for the return section.
Assembles the return surface by attaching a 24" leg to the underside.
Connects the assembled return surface to the main surface assembly.
Provides a general overview of the 60" W return workstation setup.
Connects the main surface end legs to the beam using tabs and brackets.
Secures the beam to the leg using a lock plate for stability.
Adjusts the beam width to match the work surface dimensions precisely.
Connects the 24" return end leg to the second beam assembly.
Attaches the BB3 beam to the connector bracket on the main surface beam.
Measures the width and locks the beam into its final position.
Fastens the main surface to the desk frame with wood screws.
Fastens the return surface to the desk frame using wood screws.
Attaches support bars and flat brackets to the main and return surfaces.
Provides a general overview of the 66" W return workstation setup.
Connects the 30" end legs to the main surface beam.
Secures the beam to the leg using a lock plate.
Adjusts the beam width to match the work surface dimensions.
Attaches the main work surface to the desk frame.
Assembles the C-leg by attaching a leg connecting bracket.
Connects the return legs to the beam.
Measures and adjusts the beam width for the return section.
Secures the beam to the leg using a lock plate.
Assembles the return surface as a free-standing unit.
Attaches the support bar to the main surface for longer configurations.
Assembles the return surface to the main surface.
Attaches flat brackets to the main surface for alignment.
Provides a general overview of the steel storage workstation setup.
Connects the main surface end legs to the beam assembly.
Secures the beam to the leg using a lock plate.
Measures and adjusts the beam width for optimal fit.
Attaches the main work surface to the desk frame.
Positions the steel storage unit and the main desk for assembly.
Attaches flat brackets to the main surface for the return.
Attaches the support bar and finalizes connections for stability.
Provides an overview of the cable management tray installation.
Adjusts the cable tray to the required length, typically 25"-45".
Secures the cable tray to the underside of the work surface using wood screws.
Provides an overview of the modesty panel installation process.
Attaches the L-brackets to the modesty panel using screws.
Mounts the modesty panel to the underside of the work surface.
Provides an overview of the laminate inset end panel installation.
Attaches brackets to the end legs using self-tapping screws.
Secures the inset end panel to the attached brackets with wood screws.
Provides an overview of the steel inset end panel installation.
Attaches the steel inset end panels to the end legs.
Secures the steel inset end panel to each leg using self-tapping screws.
General| Brand | CLEAR DESIGN |
|---|---|
| Model | BLADE BBC1 |
| Category | Indoor Furnishing |
| Language | English |
To Next Page