CLEAR DESIGN BLADE BBC1 - Secure Support Hardware to Main Surface for Return; Assemble Return Surface with 24 Leg

5
54" W RETURN OR SMALLER
5 | SECURE SUPPORT HARDWARE TO MAIN SURFACE FOR
RETURN SURFACE
Using 2 wood screws for each flat plate, secure plates to edge of main surface
with half of the plates extended over edge of surface. Using 4 wood screws,
secure support bar to underside of surface centered between flat plates.
6 | ASSEMBLE RETURN SURFACE WITH 24" LEG
Assemble return surface by securing BL24 leg to underside of laminate
surface with wood screws.