1. Unscrew faucet aerator as shown below Quick Connect Adapter. Your faucet aerator may
look different than faucet/aerator shown. Store aerator in safe location, for future use.
2. Identify and remove your faucet’s aerator. Check the style of your faucet & aerator to
determine if the threads are on the outside or inside.
IMPORTANT: The faucet aerator often has a rubber washer that might get stuck to the
metal faucet. Be sure to remove rubber washer from the faucet and wipe any water or
debris from faucet.
Your faucet adapter installation kit includes the aerator and three different sized adapters.
The adapters have a dual thread design to fit most standard faucets.
Faucet with Female thread style (threads on inside)
To install aerator/adapter: Determine the correct adapter size and follow installation
instructions below.
Faucet with Male thread style (thread on outside)
To install aerator/adapter: Determine the correct adapter size and follow installation
instructions below.
NOTE: For this type of faucet, you may need to use one of the adapters with the aerator to
fit the size of your faucet. The Quick Connect aerator also can be fitted directly onto the
faucet utilizing the inside threads on the aerator, depending on faucet size & style.
Installing Faucet Quick Adapter Connect
5
MALE FEMALE
To Next Page
Loading...