Clear2O CWS100 - Installation; Instructions if Faucet Adapter Kit Does Not Fit

1. Make sure both adapter and quick connect aerator have the rubber washer in place.
If not, insert a rubber washer into adapter or aerator.
2. Try one adapter to connect onto faucet. If it is not the right size,
then try the other adapter.
3. Once you have the right size adapter, screw onto faucet.
4. Hand tighten adapter in place. If additional tightening is needed, insert a coin into
the bottom slots of adapter and turn. Remove the coin.
5. Once adapter is secure, attach upper end of Quick Connect Aerator onto adapter with
permanent rubber washer in place. Hand tighten.
6. Turn on water and insure no leaks…..check gasket and tighten if necessary.
If pliers are to be used, it is recommended to place a thick cloth around quick
connector to avoid scratching.
IMPORTANT: Never remove the permanent rubber washer from aerator, leaks can occur.
You are now ready to connect your Clear
2
O Water filter pitcher!
Your CLEAR
2
O
®
product includes the most commonly used faucet adapters sizes, the
adapter sizes included with your product are:
Included with Product:
Quick Connect Aerator: Upper: Female 55/64”-27
Adapter: Upper: Male 13/16”-27 x Lower: Male 55/64”-27
Adapter: Upper: Male: 15/16”-27 x lower: Male 55/64”-27
Adapter: Upper: Female: ¾”-27 x Lower: Male 55/64”-27
In some cases, your faucet may require a less common adapter not included with the
product:
Less Common Adapter Sizes: (Examples)
Adapter: Upper: Male 55/64”-27 x Lower: Male 55/64”-27
Adapter: Upper: Female: 13/16”-27 x Lower: Male 55/64”-27
In this case, the first step is to determine what adapter size is needed. To do so, first
determine if the aerator removed from your faucet has male threads or female threads. You
will need the same type of Male or Female adapter as the aerator. Next, determine if your
aerator fits any of the adapter threads included with the product. This may help to identify
the proper thread size for adapter needed and need only find the opposite male or female
version of the same size.
Installation
Instructions if Faucet Adapter Kit Does Not Fit
6