READY FOR GRAVITY™
ADVANCED WATER FILTER
1. Select a level countertop space. Hold the water reservoir
in the upright position and lift pitcher lid to open.
2. Rinse lter under cold, running tap water for a few seconds
to wet lter and remove any debris from manufacturing.
3. Insert lter into place and rotate lter clockwise until stop.
Filter should be securely attached.
4. Discard the rst 3 pitchers of ltered water to ush the pitcher,
or use this water for plants. It is normal for carbon dust to
appear in your rst llings.
5. Fill the pitcher with cold tap water through the pour through lid.
Do not overll.
6. Allow water to lter completely before pouring or relling reservoir.
7. Close water window pour through lid when the reservoir is full.
4
To Next Page
Loading...