ClearClick AV2HD 2.0 - Connecting to Your TV

6
and into the yellow, white, and red “IN” ports
on the side of the AV2HD™ Converter 2.0.
Note: Some camcorders may require a
special type of RCA/AV cable (i.e. 3.5mm to
AV cable). If your VCR or camcorder only
has one audio output port, you will need an
RCA audio splitter cable (not included).
3. Connect your TV to the output.
Connect the included HDMI cable to the
outport port of the AV2HD™ Converter 2.0.
Connect the other end to your TV’s HDMI
input port.
Turn on your TV & set it to the correct HDMI
input.