9
6. Watch your video or (optional) start
recording!
You should see your video in HD resolution on
your TV. If not, please see the troubleshooting
information on the next page.
Make sure your video source (VCR, camcorder,
gaming system, etc.) is playing a live signal.
To start recording the video, press the
“REC/STOP” button on the AV2HD™ Converter
2.0. The LED ring will turn red while the device
is recording.
To stop recording, simply press the
“REC/STOP” button again. IMPORTANT: Wait
until the LED ring stops blinking before
removing your USB flash drive.
To Next Page
Loading...
