5
Quick Start Guide
1. Power the device.
Power the device by plugging in one of the
included USB-C cables to the “5V – 2A” port. Plug
the other end into a USB power source (such as a
USB wall adapter or charging port).
2. Plug in HDMI source and HDMI output.
Plug in your HDMI source (such as a camcorder
or gaming system) to the HDMI IN port.
The device accepts and passes through HDMI
signals of up to 4K60 input.
[NOTE: COPYRIGHTED OR CONTENT PROTECTED
SOURCES ARE NOT SUPPORTED. THIS DEVICE
WILL NOT RECORD FROM THESE SOURCES.]
You can pass through the signal to a TV or
monitor using the HDMI OUT port.
To Next Page
Loading...