6
3. Record to USB flash drive.
If you’d like, you can record your video source to
a USB flash drive (FAT32 or exFAT only). The
device will record at up to 1080P60 quality.
Plug in a USB flash drive to the “Storage / Phone”
port. Once the device recognizes the drive, press
the Record button to start recording.
A multicolor, fading LED means that the device
is ready to record.
A solid red LED means that the device is
currently recording to your USB flash drive.
A blinking red LED means that there is a
problem with your HDMI source (i.e. no signal or
your source has HDCP/content protection), or
there is a problem with your USB drive. A blinking
red LED means that the device is not recording.
To Next Page
Loading...