18
How To Use The PhotoPad Pro Software
To get started with the included
PhotoPad Pro (published by NCH
Software) software, simply follow the
steps below.
1. Insert the CD into your PC or Mac. Browse the
CD contents and run the installation file for
your PC or Mac. Install the software.
2. Next, you must activate the software. Go to:
http://www.nchsoftware.com/activation/
Enter your information and the serial number
on the back of the CD envelope that it came in.
NCH Software will email you an activation
code.
NOTE: Having trouble with your serial number
or with activation? Please email us at
licenses@clearclick.tech. We will diagnose the
issue and send you a serial number if
necessary.
To Next Page
Loading...
