16
Assembly Instructions Cont’d
1. Locate the two front heaters.
2. Align the left front heater and plug the connector that comes out of the bottom of the heater into the
plug coming out of the in the oor.
3.
Align the the hole in the back of the heater with the hole in the front wall glass Using the enlcosed
screws and washers, secure the heater to the glass through the pre-drilled hole. One washer will be
placed on the inside and one on the outside glass. The heater will be secured with these screws in two
locations.
4.
Repeat this step for the right front heater.
13 - INSTALLING FRONT HEATERS
Front
Heater
Installed
To Next Page
Loading...
