Need help?Do you have a question about the ClearPix IDM12DN-H2 and is the answer not in the manual?
Details the external components visible from the top of the dome camera.
Illustrates the underside of the dome camera, showing mounting and serial number details.
Describes the front-facing components and connectors of the dome camera.
Lists necessary tools and materials for installing the dome camera.
Details the items included in the camera's packaging for installation.
Instructions on how to safely detach the dome cover from the camera base.
Step-by-step guide for physically attaching the dome camera to a ceiling or wall.
Procedure for connecting network, power, and I/O cables to the dome camera.
Explains how the camera obtains an IP address on the network.
Methods for viewing the real-time video feed from the camera.
Guidance on adjusting the camera's pan, tilt, and azimuth for optimal viewing.
Steps to reattach the dome cover after installation and configuration.
Instructions for achieving a sharp image by focusing the camera lens.
Detailed steps for connecting an external 12 VDC or 24 VAC power source to the camera.
Instructions for connecting external input/output devices using the camera's I/O terminals.
Guide for connecting audio and video peripherals using the mini-jack connector.
Explanation of the status and link LEDs and what they indicate about camera operation.
Procedure to restore the camera's settings to their original factory defaults.
Method for configuring the camera's IP address using ARP and Ping commands.
To Next Page
General