ClearView ip-73 - 1.4 Factory Default Setup

3
Video
Motion Detect
396 (18*22) detection zones; sensitivity level ranges from 0 to 100;
area threshold ranges from 0 to
100.
Activation event: video storage, image snapshot, log, email function
and etc.
Record
Record Priority
Manual>External alarm >Video detect>Schedule
Network
Wire Network
1-ch 10/100 M Ethernet , RJ45 port
Network Protocol
HTTP, TCP/IP, ARP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP,
DNS, DDNS, PPPOE, IPv4/6, SNMP, UPNP, NTP
Remote
Operation
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
Restore Default
Setup
Built
-in Reset button
IR light
IR light 15M.
General Parameter
Power
DC12V power and PoE.
Warning
ʽ
ʽ
Do not connect these two power supplying sources to the device
at the same time; it may result in device damage!
Power
Consumption
4.5
W MAX
Working
Temperature
-10
ć~+60ć
Working
Humidify
10%~90%
Dimensions(mm)
Φ 113
h
86
Weight
280g(Excluding box)
Installation
Fixed on the wall, ceiling and etc.

)DFWRU\'HIDXOW6HWXS
Please refer to the following sheet for factory default setup information.
Setup
Item
Default Setup
IP-73
Camera
Conditions
Config File
Normal
Brightness
50
Contrast
50
Sharpness
50
Saturation
50
Anti-flicker
Outdoor
Exposure Mode
Auto
Scene Mode
Auto
Day/night Mode
Auto
BLC
Off
Mirror
Off