Cleco Tools CellCore mPro200GC-AP - 1 About this Description

About this description
4 P2402KA | 2019-05 Apex Tool Group
1
EN
1
About this description
The original language of this description is German.
This description is intended for anyone who sets up the cordless EC tool CCBA or CCBP on a mPro200GC-
AP controller.
This Instruction Manual is the Original Instruction Manual and
• describes the basic installation of the components.
• provides tips for using and setting the components up in the manner intended.
• is not sufficient for planning complex network infrastructures.
• does not contain detailed information about the components. Detailed information can be found in the
manuals concerned.
Other documents
Symbols in the text
No. Type
P2398PM Programming Manual Cordless EC Tool CellCore
P2403HW Hardware description mPro200GC(-AP) CellCore
P2390BA Instruction Manual cordless EC tool CellCore
P2372JH Installation Guide LiveWire Utilities
P2280PM Programming Manual S16813
Documentation mProRemote Professional
Italic identifies menu options (e.g., diagnostics), input fields, control boxes, options fields or
dropdown menus.
> Denotes the selection of a menu option from a menu, e.g., File > Print
<…> Denotes switches, pushbuttons or the buttons of an external keyboard, e.g., <F5>
Courier Denotes filenames and paths, e.g., setup.exe
• Denotes lists, Level 1
- Denotes lists, Level 2
a)
b)
Denotes options
→ Denotes results
1. (...)
2. (...)
Denotes handling steps
 Denotes an individual handling step