Do you have a question about the Clemco CMS Series and is the answer not in the manual?
Brand | Clemco |
---|---|
Model | CMS Series |
Category | Carbon Monoxide Alarm |
Language | English |
Covers set-up, operation, and replacement parts for the CMS Remote Alarm and related monitors.
Explains Clemco's safety alert signal words (Danger, Warning, Caution, Notice) based on ANSI Z535.4-2011.
Details the 12-volt DC remote alarm, its features, and its use in high noise or inconspicuous areas.
Lists and illustrates the primary components of the remote alarm package, including the alarm case, horn, and cables.
Details initial steps for setting up the remote alarm, including disconnecting power and accessing the faceplate.
Describes how to string the alarm wire through the case and connect the alarm wire socket to the circuit board.
Explains that the remote alarm requires no special mounting and can be used free-standing or hung.
Guides on placing the alarm conspicuously and connecting the cable to the monitor, ensuring proper alignment.
Instructs to refer to the monitor operations manual for testing the alarm using the same process.
Lists the stock numbers for various replacement parts of the CMS Remote Alarm system.