Clevo N350TW - Computer Docking Procedure with Station; Docking Port Cover Protection

33
English
Docking the Computer with the Docking Station
1. Remove all packing materials and place the docking station on a stable sur-
face.
2. Securely attach any peripherals you want to use with the docking station (e.g.
keyboard and mouse) to their ports.
3. Attach the AC/DC adapter to the DC-In jack at the rear of the docking station,
and then plug the AC power cord into an outlet, and connect the AC power
cord to the AC/DC adapter.
4. The power button LED on the docking station will be orange.
5. Close the notebook computer’s lid/LCD and turn the computer over.
6. Slide the notebook computer’s docking port cover latch in the direction of the
arrow at point to open the cover (failure to open the cover of the docking
port before connecting the computer to the docking station may result in
irreparable damage to the connector on the docking station).
Figure 23 - Opening the Docking Port
1
Figure 22 - Docking Station with AC/DC
Adapter Plugged
1
2

Docking Port Cover
Make sure you keep the cover closed when the computer
is not docked in the station. This will help prevent foreign
objects and/or dust getting in to the contact area.
2