Clevo NP71PNP User Manual

Disassembly
Removing the Keyboard 2 - 9
2.Disassembly
Keyboard Installation Procedure
1. Make sure to insert a part of the adhesive mylar and then install it properly in the location as shown (Figure
5a).
2. Pull the mylar cover to reveal the adhesive side of the mylar (Figure 5b).
3. Carefully connect the keyboard ribbon cable
to the locking collar socket and then insert the keyboard in
place (Figure 5c).
4. Make sure to press the keyboard downward in the indicated area as shown to ensure that it sticks to the adhe-
sive mylar (Figure 5d). Apply pressure atleast 2kg for 10 seconds.
1
2
3
4
5
6
7
a.
3
1
6
b.
2
c.
4
4
5
5
d.
7

6. Keyboard
Figure 5
Keyboard
Installation
a. Install the adhesive my-
lar.
b. Remove the mylar cov-
er.
c. Connect the keyboard
ribbon cable to the lock-
ing collar socket and in-
sert the keyboard in
place.
d. Make sure to press the
keyboard toward the
computer.

Re-inserting the Key-
board
When re-inserting the
keyboard firstly, align the
keyboard tabs at the bot-
tom of the keyboard with
the slots in the case.

Clevo NP71PNP Specifications

General

Brand	Clevo
Model	NP71PNP
Category	Laptop
Language	English