Mounting
CLEW bindings are supplied with all the necessary hardware for mounting. Use only the hardware provided with the binding, since it has been chosen to
provide the best board-to-binding connection. Using dierent mounting screws may cause damage to the board, place the user at risk of binding failure
and void the binding warranty.
If you are not confident about mounting the binding yourself, there are many well qualified snowboard shops which will gladly provide this service.
Unscrew the fixing screw and push
the footbed forward to remove it.
Arrange the binding in the proper
angle and distance on the snowboard.
The binding pair should always be
placed in the middle of the snow-
board. With one exception: in deep
snow, it is also good to ride with
the binding slightly shifted back.
?
Not sure which position is best for you?
On page 6 we have some tips for you!
.
!
1 2
Define the horizontal location of the
binidng.
For ideal force transmission, the
binding with soft boot should be
centered on the snowboard.
!
You can adjust the footbed individually.
That is especially useful for big feet.
We explain how it works on page 8.
4
To Next Page
Loading...