EasyManua.ls Logo

Cli-mate CLI-DH20-E - Operation Conditions and Safety Precautions

Cli-mate CLI-DH20-E
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Keep the unit away
from fire, flammable gas,
combustible products
or vapours, and corrosive
substances.
Do not operate the unit
without filters.
When transporting the
air purifier, always hold
the handles on the side
of the unit.
To protect against
fire, electric shock and
personal injury, do not
immerse cord, plugs,
or appliance in water
or other liquid.
Do not place on or near
a hot gas, electric burner
or heating appliance.
Check voltage to be sure
that the voltage indicated
on the nameplate agrees
with your voltage.
SPECIAL
PRODUCT
INSTRUCTIONS
This appliance is designed
for household use only.
Do not use this unit
outdoors, in wet
environments or on
wet surfaces.
To achieve best
performance; make sure
all doors and windows are
closed before turning on
the unit.
The appliance air vents
and air grilles must not
be obstructed at any time.
Air flow is required for the
unit to operate effectively.
Place unit in a flat location
at least 30cm from wall or
other appliances.
Units must be placed on
a stable flat surface to
reduce possible excessive
vibration and noise.
Units must never be
placed and operated on
an angle as water spillage
from reservoir can occur.

Other manuals for Cli-mate CLI-DH20-E

Related product manuals