Clifford 1.2 User Manual

Remote Start Keyless Entry
Model 1.2
Installation Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a person other than a
trained professional may result in severe damage to a vehicle’s electrical
system and components.
© 2008 Directed Electronics, Vista, CA
N4102X 2008-09

Clifford 1.2 Specifications

General

Brand	Clifford
Model	1.2
Category	Remote Starter
Language	English

Summary

CLIFFORD Remote Start Keyless Entry Model 1.2 Installation Guide

Safety and Installation Preparation

Critical Safety Warnings and Precautions

Essential safety guidelines for installation and operation to prevent damage or injury.

Wiring and Connection Procedures

Wiring Best Practices and Component Location

Primary (H1) and Auxiliary (H2) Harness Wiring

Detailed wiring diagrams and pinouts for the main H1 and H2 harnesses.

Heavy Gauge (H3) and Input Harness Connections

Wiring details for the H3 heavy gauge harness and 5-pin input harness.

Auxiliary Output and Door Lock Wiring

Neutral Safety Switch Interface and Testing

Details the interface and testing procedure for the neutral safety switch.

System Configuration, Features, and Troubleshooting

Remote Control Learn Routine

Remote Start Features Menu

Bitwriter® Feature Tuning Options

Explains how the Bitwriter can be used to fine-tune various system features.

Shutdown Diagnostics Procedure

Provides a procedure to diagnose system shutdowns using LED flashes.

Remote Starting Diagnostics

Remote Start Safety Check Procedures

Troubleshooting Common Issues

Remote Start System Troubleshooting

Manual Transmission Start Diagnostics