Need help?Do you have a question about the Clifford 500 and is the answer not in the manual?
Ends recurring false alarms with patented technology.
Provides fingertip command from up to 100 feet.
Protects against code-grabbers using random code encryption.
Allows sounding siren and flashing lights for panic.
Enables or exits valet mode remotely.
Detects interior movement and vibration impacts.
Offers choice of chirp volume and muting.
Explains how to transmit up to 12 different system functions.
Explains system feedback through chirps and light flashes.
Procedure to switch the system to valet mode.
Procedure to restore the system to normal operation.
Using channel 5 to remotely enable or exit valet mode.
Unlocking and locking doors while in valet mode.
Choice between fault-proof or super-secure interrupt.
Alerts for tampering attempts or intrusion.
Protects with Proximity and Piezo sensors.
Automatically tests system triggers and sensors.
Identifies specific faulty trigger or sensor.
Stores identity of last activated or malfunctioning trigger.
Alerts for intrusion attempts detected while away.
Prevents repeated false alarms by verifying triggers.
Remotely pops the trunk when the system is disarmed.
Restores system to previous state after power interruption.
Adjusts volume of arm/disarm chirps.
Silences arm/disarm chirps until restored.
Allows silent arming/disarming with button 3.
Sets alarm sound duration to 30 or 60 seconds.
Configure automatic arming settings.
Configure automatic door locking with arming.
Adjust chirp confirmation settings.
Set user preference for chirp volume.
Enable or disable the headlight warning feature.
Configure automatic door lock/unlock behavior.
Change the duration of the siren alarm.
Configure the type of tamper alert.
Enable or disable the FACT feature.
Program a remote for arming/disarming functions.
Program a remote for accessory functions.
Program a remote for silent arm/disarm.
Program a remote for optional accessory functions.
Program a remote for controlling valet mode.
Program a remote for headlight control.
Clear all programmed remote control codes.
Adjust the timer setting for channel 6.
To Next Page
General