To Next PageTo Next Page
Need help?Do you have a question about the Clifford 5706X and is the answer not in the manual?
Covers safety, regulations, warranty, and replacement parts for the system.
Initial steps, including charging the remote and understanding basic operation.
Guide on performing system functions using the remote control.
How to perform fundamental system functions like arming, disarming, and remote start.
Step-by-step guide for starting and stopping the vehicle's engine remotely.
Instructions for silent arming, silent disarming, and AUX 1 control.
Activates or deactivates a timed engine start sequence.
Instructions for sensor silent arm, car finder, and AUX 3 control.
Automatically starts the engine based on temperature and battery level.
Instructions for full silent arm, AUX 4 control, and defogger activation.
Identifies common remote start errors and their resolutions based on system feedback.
Introduces Timer Start and Smart Start for automatic engine activation.
Specific procedures and safety for remote starting manual transmission vehicles.
Crucial safety warnings, installation guidelines, and warranty information for the system.
General| Remote Start | Yes |
|---|---|
| Keyless Entry | Yes |
| Panic Mode | Yes |
| LED Status Indicator | Yes |
| Number of Remotes Included | 2 |
| Two-Way Paging | Yes |
| Remote Control | Yes |
| Starter Kill | Yes |
| Ignition-Controlled Door Locks | Yes |
| Valet Mode | Yes |
| Impact Sensor | Yes |
| Dome Light Supervision | Yes |
| Door Pin Switch | Yes |
| Remote Start Ready | Yes |
| Shock Sensor | Yes |
| System Type | 2-Way |
| Alarm Features | Shock Sensor |
| Hood Pin Switch | Yes |
| Trunk Pin Switch | Yes |
