Need help?Do you have a question about the Clifford III and is the answer not in the manual?
General| Number of Buttons on Remotes | 4 |
|---|---|
| Remote Start | Yes |
| Keyless Entry | Yes |
| System Type | Remote Starter |
| Battery Life | 1 year |
Guidelines for safe operation of the remote starter, including ventilation and passenger safety.
Details on the 4-button/12-channel remote's range and functions like starting, locking, and lights.
Ensures vehicle safety conditions (park, ignition off, temp, hood) before remote starting.
System shuts down engine if unauthorized operation attempts (brake, park shift, hood).
Automatic engine cranking for cold starts and automatic shutdown if unattended.
Prevents starter grinding and allows remote door locking/unlocking.
Automatic door locking/unlocking and leaving engine running briefly.
Monitors battery voltage and starts engine to recharge if low.
Covers AutoStart Battery and Temperature modes for vehicle maintenance.
Protects vehicle and allows adding/deleting remote controls.
Interfaces with factory alarms and notes automatic transmission requirement.
Guidelines for proper remote starting procedures like parking location and brake use.
Critical safety warnings against starting in enclosed areas or with people/pets inside.
Description of the 4-button/12-channel remote, its range, and functions.
Instructions on how to select different functions (channels) using the remote buttons.
Step-by-step guide to locking and unlocking vehicle doors using the remote.
Procedure for starting and stopping the engine remotely, including safety checks.
How the system handles diesel engines, including glowplug activation.
Steps to take the vehicle out of remote start mode and begin driving.
Instructions for using ShortStop to keep the engine running when exiting.
How the system interfaces with existing factory car alarm systems.
Details on automatic door lock/unlock features and their user-selectable settings.
Explanation of starter interrupt, and its automatic activation features.
How valet mode works and its purpose in disabling starter interrupt.
Definitions for terms like 'digit', 'valet code', and 'PlainView switch'.
Step-by-step instructions for entering and exiting the system's valet mode.
Guide to changing the factory-set valet code for enhanced security.
Details on automatic engine starting for battery maintenance and cold temperatures.
How to activate headlights and trunk release using the remote control.
Automatic closing of power windows/sunroof when locking doors.
Instructions for changing system settings like AutoStart, AutoLock, and valet code.
Table detailing features, factory settings, programming taps, and confirmation.
Procedure for programming additional remote controls to the system.
Steps to remove digital codes of lost/stolen remotes for security.
To Next Page
