Need help?Do you have a question about the Clifford intelliguard 700 and is the answer not in the manual?
Details the 4-button/12-channel remote control, its range, and button functions.
Explains the factory default functions assigned to each remote control channel.
Describes AntiScan technology that prevents code-grabbing by thieves.
Provides a guide to understanding system feedback through chirps and parking light flashes.
Explains how to set and use a personal secret valet code for system security.
Defines key terms like 'digit' and 'valet code' used in the valet mode section.
Provides instructions on changing the default secret valet code to a personalized one.
Explains how to enter and exit valet mode remotely using the QuickAccess feature.
Details how to temporarily disable the optional sensor #2 for specific situations.
Guides users on testing and adjusting the sensitivity of the Magnetic Resonance Sensor.
Explains how to identify specific malfunctioning triggers or sensors using LED indicators.
Allows users to select or create custom siren sound patterns for the system.
Enables control over the volume of arm and disarm chirp acknowledgments.
Provides an option to permanently silence arm and disarm chirps.
Allows silent arming/disarming by using a specific remote control channel.
Allows users to set the siren duration to either 30 or 60 seconds.
A table outlining features that can be customized via programming.
To Next Page
General