48
Enhanced safety:
Since this range of appliances is intended for storing items of value, we have been careful to select quality
components and to design suitable manufacturing techniques to ensure optimum safety in operation.
Installing the handle:
Your appliance has a stainless steel handle. To fit it, simply screw it onto the door with the screws supplied as
per the diagram below, having first removed the seal.
Reversing the door:
FOR AV21SX(-IX)/AV51SX(-IX)/AV7X(-IX)
1. Lower hinge (right) 2 . Screws 3 .Door axis
4. Door 5. Top hinge (Right) 6. Hinge Screws
7. Top hinge (left) 8. Decorative nail 9. Lower hinge (left)
10. Door limit device 11. Screw 12. Plug
1. Open the door to 90 degrees, remove the two screws (2) from the lower door axis (3), remove the door (4)
and door axis (Fig. A).
2. Position the door (4) safely and remove the plug (12) from the top of the door frame. Unscrew one screw (11)
at the bottom and remove the door limit device (10). Install the door limit device (10) at the top of the door
frame. Please use the spare plug (12) to block the hole at the top of the door frame. (Fig. A/B)
3. Take out three hinge screws (6) from the upper hinge (right) (5) and remove it. (Fig. C)
Front
Back
To Next Page
Loading...
Need help?
General
