4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C (N class marked on the rating plate). If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected and it may not be possible
to obtain temperature between 5-10°C/10-20°C.
Indicator light illuminates to signify the cooling mode is currently in operation
To control the inner light turn on/off
To control this appliance turn on/off
Temperature display Temperature display
of the upper compartment of the lower compartment
Used to raise (warm) the temperature in 1°C (upper compartment)
Used to lower (cool) the temperature in 1°C (lower compartment)
Setting the temperature control
You can set the temperature as you desire by pushing the or button. When you push the two
buttons for the first time, the LED readout will show the original temperature set at previous time. The
temperature preset at the factory is:
Upper compartment: 10°C
Lower compartment: 20°C
The temperature that you desire to set will increase 1ºC if you push the button once, on the
contrary the temperature will decrease 1ºC if you push the button once.
Upper compartment: the temperature setting can be adjusted from 5°C to 10°C
Lower compartment: the temperature setting can be adjusted from 10°C to 20°C
To Next Page
Loading...
Need help?
General
