Climate Technology 43855 - Page 48

47
1. Touch the temperature icon ( ) or humidity icon ( ). The selected icon will
flash and SET OVERRIDE TEMPERATURE or SET OVERRIDE HUMIDITY appears,
depending upon your selection.
2. Touch the or sign to adjust the setting.
3. Press and the screen displays SELECT HOLD TYPE.
4. Touch the or sign to select TEMPORARY HOLD.
5. Press and the screen displays TEMPORARY HOLD – HOLD UNTIL.
6. Touch the hour and minutes and use the or sign to set the ending time.
7. To put both temperature and humidity on the same hold press the other icon
and repeat steps 1-2.
8. Press and the main display shows HOLD.
44003-01 r051507