Need help?Do you have a question about the Climate Technology 43168 and is the answer not in the manual?
Defines operational temperature limits and display range for the thermostat.
Explains the 3.5-minute delay to prevent compressor damage from rapid cycling.
Lists the tools and materials required for the thermostat installation.
Provides instructions and cautions for removing the existing thermostat.
Details how to label wires using provided labels, ignoring wire color.
Instructions for positioning and securing the wallplate to the wall.
Guides on connecting wires and attaching the thermostat to the wallplate.
Details the function of each button and switch on the thermostat.
Explains the meaning of the system status LEDs.
How to view the current set temperature on the thermostat.
Steps to adjust the desired temperature setting.
How to select between heating and cooling modes.
Guides on temporarily or permanently overriding programmed settings.
Explains pre-programmed settings for energy efficiency.
Step-by-step instructions for setting up personalized programs.
Adjusts cycling frequency for the first stage of heating/cooling.
Adjusts cycling frequency for the second or auxiliary stage.
Sets fan run time after compressor turns off in cooling.
Sets automatic fan circulation intervals for air circulation.
Enables gradual temperature recovery from energy-saving setpoints.
Explains the filter change indicator and reset procedure.
Notes that settings are retained during power outages.
Troubleshooting steps for a blank display.
Troubleshooting for fan not activating in heat mode.
Troubleshooting steps for unusual display behavior.
Solutions for continuous system operation when off.
Addresses error codes displayed on the thermostat.
General| Power Source | Battery |
|---|---|
| Display Type | Digital |
| Hold Function | Yes |
| Backlit Display | Yes |
| Battery Life | Up to 1 Year |
| Compatibility | Single-stage heating and cooling systems |
To Next Page
